Camera
Image Sensor:1/1.7″ Progressive Scan CMOS
Signal System:PAL/NTSC
Min. Illumination:Color: 0.008 Lux @ (F1.2, AGC ON)
0 Lux with IR
Shutter time:1 s to 1/100,000 s
Slow shutter:Yes
Lens:2.8 to 12 mm
Lens Mount:Integrated
Adjustment Range:Pan: 0° to 355°, tilt: 0° to 75°, rotate: 0° to 355°
Day& Night:IR Cut Filter
Wide Dynamic Range:Digital WDR
Digital noise reduction:3D DNR
Focus:Auto, semi-auto, manual
Compression Standard
Video Compression:H.265+/H.265/H.264+/H.264/MJPEG
H.264 code profile:Baseline Profile/Main Profile/High Profile
Video bit rate:32Kbps~16Mbps
Audio Compression:G.711/G.722.1/G.726/MP2L2/PCM
Audio bit rate:64Kbps(G.711)/16Kbps(G.722.1)/16Kbps(G.726)/32-192Kbps(MP2L2)/32Kbps(PCM)
Dual Stream:Yes
Triple Streams:Yes
Image
Max. Image Resolution:4000 × 3000
Frame Rate:50Hz: 20fps(4000 × 3000), 25fps (4096 × 2160, 3840 × 2160, 3072 × 1728, 2560 × 1440, 1920 × 1080, 1280 x 720)
60Hz: 20fps(4000 × 3000), 30fps (4096 × 2160, 3840 × 2160, 3072 × 1728, 2560 × 1440, 1920 × 1080, 1280 x 720)
Sub Stream:50Hz: 25fps (704 × 576, 640 × 480)
60Hz: 30fps (704 × 480, 640 × 480)
Third Stream:50Hz: 25fps (1920 × 1080, 1280 × 720, 704 × 576, 640 × 480)
60Hz: 30fps (1920 × 1080, 1280 × 720, 704 × 480, 640 × 480)
Image Enhancement:BLC, HLC, Defog, EIS,3D DNR, Lens Distortion Correction
Image Settings:Rotate mode, saturation, brightness, contrast, sharpness, AGC, and white balance are adjustable by client software or web browser
Distortion Correction:Support
Target Cropping:Yes
BLC:Support
HLC:Support
Smart Defog:Support
EIS:Support
ROI:4 fixed regions for main stream, sub stream, third stream, fourth stream, and fifth stream, and dynamic face tracking
Picture Overlay:LOGO picture can be overlaid on video with 128 × 128 24bit bmp format
Day/Night Switch:Auto/Schedule/Day/Night/Triggered by Alarm In
Network
Network Storage:Support microSD/SDHC/SDXC card (256 GB) local storage and NAS (NFS,SMB/CIFS), ANR
Alarm Trigger:Motion detection, video tampering alarm, network disconnected, IP address conflict, illegal login, HDD full, HDD error
Protocols:TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, UDP, Bonjour
General Function:One-key reset, anti-flicker, five streams and up to 5 custom streams, heartbeat, password protection, privacy mask, watermark, IP address filter
System Compatibility:ONVIF (Profile S, Profile G), ISAPI
Interface
Communication Interface:1 RJ45 10M/100M/1000M Ethernet port
1 RS-485 interface (half duplex, HIKVISION, Pelco-P, Pelco-D, self-adaptive)
Audio:1-ch 3.5 mm input (line in), 1-ch 3.5mm output, mono
Alarm:1-ch input, 1-ch output (up to 24 VDC 1A or 110 VAC 500 mA)
Alarm Input:1
Alarm Output:1
Video Output:1Vp-p composite output (75 Ω/CVBS)
On-board storage:Built-in micro SD/SDHC/SDXC slot, up to 256 GB
Reset Button:Yes
Audio
Environment Noise Filtering:Support
Audio Sampling Rate:8 kHz/16 kHz/32 kHz/44.1 kHZ/48 kHz
Smart Feature-set
Behavior Analysis:Line crossing detection, Intrusion detection, Region entrance, Region exiting, Unattended baggage, Object removal
Line Crossing Detection:Cross a pre-defined virtual line
Intrusion Detection:Enter and loiter in a pre-defined virtual region
Region Entrance:Enter a pre-defined virtual region from the outside place
Region Exiting:Exit from a pre-defined virtual region
Unattended Baggage:Objects left over in the pre-defined region such as the baggage, purse, dangerous materials
Object Removal:Objects removed from the pre-defined region, such as the exhibits on display.
Exception Detections:Scene change detection, defocus detection
Recognition:Face Detection
Statistics:Object Counting (Entrance and Exit object number is accounted and showed on screen in real time)
General
IR Range:Up to 30 m
Operation Condition:-30 °C to 60 °C (-22 °F to 140 °F), humidity 95% or less (non-condensing)
Power Supply:Recommended DC input 12 V, voltage range of 10 to 48 VDC allowed, two-core terminal block
Power Consumption:With extra load: 12 VDC, 0.8 A, max. 10.5 W; PoE (802.3af, 36 V to 57 V), 0.2 A to 0.3 A, class 3
Without extra load: 12 VDC, 0.6 A, max. 8 W; PoE (802.3af, 36 V to 57 V), 0.2 A to 0.3 A, class 3
“with extra load” means that an extra device is connected to and powered by the camera.
Impact Protection:IK10
Dimensions:Camera: Φ140.5 × 122.6 mm (Φ5.5″ × 4.8″)
With package: 244 × 174 × 173 mm (9.6″ × 6.9″ × 6.8″)
Weight:Camera: 900 g (1.98 lb.)
With package: 1250 g (2.76 lb.)